Move the W7 guest system to the other VM host, and use the Ngear 24port GBit switch NetgearGS724 in the middle of it. Using a W7 guest system on the same host, I configured it to use the STATIC IP, attached the nic that was directly connected to the modem, and poof, shows 160-170 down. No clients using PFSENSE as a gateway on my local network can get more than 80-100 download speeds from or any other speed test thingy.ĮLIMINATE EVERYTHING - hubs switches, cables. It says that the ESXI VM host hardware and virtualization can support that speed. It says that the quad card is working fine at 1GB speeds. that speed is acceptable.īut hey it tells me that cables and config is good. The PFsense GUI traffic meter is shows 165-175MB down. Take wire from modem and put into quad nic port.Īttach that port to PFSENSE f/w and configure the wan ip address. Internet WAN Nics are separated, broken out, etc. I'm paying for a 150up/35down line - the speed is there at the modem.Ģ Different HP Proliant systems, M元50/360s - both have quad GBE Nic cards.Ģ CPUs: 2 package(s) x 1 core(s) 6GB RAM for the VM. Internet speed with analyzer directly connected to modem, (5) Static IPs, 185MB down/36Mup
